BT BT2500 Quick Setup And User Manual page 68

68
doesn't work
Have you activated the batteries correctly? See page 5.
• Check that the mains power is correctly connected.
Is the telephone cord plugged into the base and phone wall socket?
• Check that the mains power is correctly connected.
• Only use the telephone cord supplied with the phone.
't make or receive calls
Check that the mains power is correctly connected.
• The batteries may need recharging.
• Has there been a power cut? If so, place the handset back on the base for ten
seconds and try again. If it still doesn't work, disconnect the batteries and mains
power for ten minutes, then reconnect and try again.
If you're connected to a switchboard, check whether you need to dial an
access code, see page 55.
set doesn't ring
The ringer volume may be switched off, see page 50.
• Check that the mains power is correctly connected.
• Do Not Disturb may be switched on, see page 23.
• Make sure the handset is registered to the base, see page 64.
0800 145 6789* or go to www.bt.com/producthelp