General Information - Briggs & Stratton Vanguard 470000 Series Operating & Maintenance Instructions

Briggs & stratton push lawn mower operating & maintenance manual
Hide thumbs Also See for Vanguard 470000 Series:
Table of Contents

Advertisement

ENGINE INFORMATION
MODEL SERIES 470000
11
10
9
8
1. Oil fill cap
2. Dipstick
3. Spark plug (2 locations)
4. Starter solenoid
5. Starter
6. Oil drain plug (2 locations)
7. Fan belt
8. Fuel filter
9. Radiator drain plug
10. Radiator screen and handle
11. Radiator and radiator cap

GENERAL INFORMATION

This is a twin cylinder, overhead valve (OHV), liquid-cooled
engine. It is a low emissions engine.
In the state of California, Model Series 470000 engines are
certified by the California Air Resources Board to meet emissions
standards for 250 hours. Such certification does not grant the
purchaser, owner or operator of this engine any additional
warranties with respect to the performance or operational life of
this engine. This engine is warranted solely according to the
product and emissions warranties stated elsewhere in this
manual.
Bore
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stroke
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displacement
. . . . . . . . . . . . . . . . . . . . . . . . .
Note: For practical operation, the horsepower loading should not
exceed 85% of rated horsepower. Engine power will decrease
3-1/2% for each 1,000 feet (300 meters) above sea level and 1%
for each 10° F (5.6° C) above 77° F (25° C). Engine will operate
satisfactorily at an angle up to 25°.
12
13
7
12. Air Cleaner
13. Fuel pump (if equipped)
14. Muffler
15. Choke control
16. Throttle control
(2 possible locations)
17. Radiator reservoir
18. Oil filter
19. Oil pressure sensor
20. Engine Model label
Model
xxxxxx
3.19 in. (81 mm)
2.87 in. (73 mm)
45.9 cu. in. (752 cc)
1
2
3
4
14
20
5
6
Type
Code
xxxx xx
xxxxxxxx
TUNE-UP SPECIFICATIONS
MODEL SERIES 470000
Armature air gap
Spark plug gap
Valve clearance with valve springs installed and piston 1/4 in. (6 mm)
past top dead center (check when engine is cold).
Intake
. . . . . . . . . . . . . . . . . . .
Exhaust
. . . . . . . . . . . . . . . . .
6
15
16
6
19
. . . . . . . . .
0.008 - 0.012 in. (0.20 - 0.30 mm)
. . . . . . . . . . . . . . . . . . . . . . . .
0.007 - 0.009 in. (0.18 - 0.23 mm)
0.007 - 0.009 in. (0.18 - 0.23 mm)
16
3
17
18
0.020 in. (0.51 mm)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vanguard 540000 series

Table of Contents