Clock Manager; Clock Manager - Mode Manager - AMX NXB-KNX Operation/Reference Manual

Netlinx knx interface

Hide thumbs Also See for NXB-KNX:

Table of Contents

Configuration

Clock Manager

Hover the cursor over the Clock Manager option in the Admin menu to open the Clock Manager sub-menu

(FIG. 8).

FIG. 8

Clock Manager sub-menu

Each of the options listed in the submenu are also accessible via options on the Clock Manager page (FIG. 9).

FIG. 9

Clock Manager options

Select the main Clock Manager entry in the Admin Menu, or select Mode from the Clock Manager sub-menu,

and the Mode Manager page will be displayed (FIG. 10):

FIG. 10

Clock Manager - Mode Manager page

The options on the Mode Manager page provide inputs for selecting the current mode of the system time:

Time Synch:

Use the radio buttons to select either Network Time or StandAlone.

Note: If using StandAlone mode, the time will be valid only until the unit is

rebooted. Once the unit is rebooted, the time will be lost, and will have to be

reset.

Note that the Daylight Savings and NIST Servers tabs are enabled only if Net-

work Time is selected as the mode.

NXB-KNX NetLinx KNX Interface

Table of Contents

Netlinx nxb-knx