Setting Presets; System Setup - Clock Setup Mode Screen; Setting System Time - AMX DAS-M-0404 Operation/Reference Manual

Setting Presets

Once a desired station is tuned, select Preset on the Tuner (#) Options screen (FIG. 20) to save the
station as a preset. This selection invokes the Select Which Preset To Save screen (FIG. 21):
FIG. 21 Select Which Preset To Set screen
Select a Preset (1-10) to associate with the currently tuned station.

System Setup - Clock Setup Mode screen

Select Clock from the System Setup Mode screen (FIG. 3) to access the Clock Setup Mode screen
(FIG. 22):
FIG. 22 Clock Setup Mode screen

Setting System Time

In order for Alarms to work, a System Time must be set at the Controller.
1. Select Set Time in the Clock Setup Mode screen (FIG. 22) to access the Clock Setup screen that
displays the current Time, Date, and Day (FIG. 23):
FIG. 23 Clock Setup screen
2. Select HH (hour) by using the Navigation buttons (<< / >>) on the front of the Controller. An arrow
is displayed in front of HH, as shown in FIG. 23.
3. Use the UP/DOWN Navigation buttons to increase/ decrease the hours (1 - 24).
4. Proceed to MM (minute) & SS (second) in the same manner (01 - 60).
Mi Series Audio Controllers
Programming
Exits this screen
To the Alarms screens
To the Clock Setup screen
Saves Time / Date settings
and exits this screen
35