Language] Setting; Key Beep] Setting; Date And Time Setting - UNI-T UT3500 Series User Manual

the bottom of the screen. Press the corresponding function key can enter the <SYSTEM
CONFIG> page.
All settings on the system configuration page will be automatically saved in the system and
loaded automatically when the system is turned on next time.

8.1.1 [LANGUAGE] Setting

The instrument supports two languages, Chinese and English.
Setting Steps:
1. Press the [Test] or [Setup] key, and select [SYSTEM CONFIG] with the function key at
the bottom of the screen to enter the < SYSTEM CONFIG> page;
2. Use the cursor keys to move the cursor to [LANGUAGE];
3. According to your own needs, press the function key at the bottom of the screen to
select Chinese [CHN] or ENGLISH (English).

8.1.2 [Key Beep] Setting

The instrument keys can be set with or without key prompt sound.
Setting Steps:
1. Press the [Test] or [Setup] key, and select [SYSTEM CONFIG] with the function key at
the bottom of the screen to enter the < SYSTEM CONFIG> page;
2. Use the cursor keys to move the cursor to [Key Beep];
3. According to your own needs, press the function key at the bottom of the screen to
select ON or OFF. ON means that the key beep is on; OFF means that the key beep
is off.

8.1.3 Date and Time Setting

The instrument uses a 24-hour clock, and it can modify the date and time.
Setting Steps:
1. Press the [Test] or [Setup] key, and select [SYSTEM CONFIG] with the function key at
Figure 8-1 <SYSTEM CONFIG> Page
42
UT3500 series User Manual