AMX Modero NXD-700Vi Operation/Reference Manual page 173

Font ID numbers are generated by the TPDesign4 programmers report.
^FON
Set a font to a Syntax:
specific Font ID
"'^FON-<vt addr range>,<button states range>,<font value>'"
value for those
Variable:
buttons with a
defined address variable text address range = 1 - 4000.
range.
button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons
1 = Off state and 2 = On state).
font value = range = 1 - XXX. Refer to theDefault Font Styles and ID Numbers table on
page 135.
Example:
SEND_COMMAND Panel,"'^FON-500.504&510.515,1&2,4'"
Sets the font size to font ID #4 for the On and Off states of buttons with the variable text
range of 500-504 & 510-515.
The Font ID is generated by TPD4 and is located in TPD4 through the Main menu.
Panel > Generate Programmer's Report >Text Only Format >Readme.txt.
^GDI Syntax:
Change the
"'^GDI-<vt addr range>,<bargraph drag increment>'"
bargraph drag
Variable:
increment.
variable text address range = 1 - 4000.
bargraph drag increment = The default drag increment is 256.
Example:
SEND_COMMAND Panel,"'^GDI-7,128'"
Sets the bargraph with variable text 7 to a drag increment of 128.
Parameters 1,2, and 3 will cause a bargraph or slider to be inverted regardless of
^GIV
orientation. Their effect will be as described for joysticks.
Invert the
joystick axis to Syntax:
move the origin to
"'^GIV-<vt addr range>,<joystick axis to invert>'"
another corner.
Variable:
variable text address range = 1 - 4000.
joystick axis to invert = 0 - 3.
0
2
For a bargraph 1 = Invert , 0 = Non Invert
Example:
SEND_COMMAND Panel,"'^GIV-500,3'"
Inverts the joystick axis origin to the bottom right corner.
0 = Normal
1
1 = Invert horizontal axis
2 = Invert vertical axis
3
3 = Invert both axis locations