Table of Contents
Advertisement
Rea® Spirea® 4 NG
CAUTION!
Risk of Injury
Non-original or wrong parts may affect the
function and safety of the product.
– Only use original parts for the product in use.
– Due to regional differences, refer to your
local Invacare catalog or website for available
options or contact your Invacare distributor.
See addresses at the end of this document.
The functions of the safety devices are described in chapter
3 Product Overview, page 7 .
2.3 Labels and symbols on the product
Identification label
The identification label (1. or 2.) is attached to the frame of
your wheelchair and gives the following information:
Manufacturer's address
A
Date of manufacture
B
Product description
C
Seat width
D
Reference number
E
Serial number
F
Medical device
G
Serial number barcode
H
6
EAN/HMI barcode
I
Maximum user weight
J
K
Read user manual
European conformity
L
Read user manual
Indicates a hazardous situation that could
result in serious injury or death if it is not
avoided.
Non-locking side parts warning label
Do not lift the wheelchair by non-locking
side parts.
Posture belt information label
The posture belt has the good length, when
there's just sufficient space for a flat hand
between body and belt.
Reclining mechanical backrest information label
Push on the backrest canes (1) before
operating the levers (2), this is to release the
auto-locked security system. This label is
attached to the upper part of the backrest
cane (right side).
Snap hook symbols
Depending on the configuration, some wheelchairs may be
used as a seat in a motor vehicle, some may not.
Tie-down positions where the restraint
system straps must be placed in case of
transporting the occupied wheelchair in a
ISO 717 6-19
motor vehicle. This symbol is only attached
to the wheelchair when it is ordered with the
transportation kit option.
WARNING Symbol
This wheelchair is not configured for
passenger transport in a motor vehicle. This
symbol is attached to the frame close to the
identification label.
1536533-F
Advertisement
Table of Contents
