Table of Contents
Advertisement
Setting the IP Address
...from previous section
If you are unsure of the
level of the menu
halfway through the
operation, refer to
"Appendix A Control
Panel Menu (Abstract)"
to confirm the overall
structure of the menu.
All manuals and user guides at all-guides.com
3.2 Setting the IP Address (When Using TCP/IP Protocol)
Press
once
Press Set/Eject once.
Press
is reached. At this time, if you keep pressing the button,
the value will change in units of 10.
Press
Repeat Steps
Press Set/Eject once.
The following screen is displayed after three seconds.
Press Cancel once. The screen returns to the screen
of the next lower level where "IP Address" is displayed
returns on the lower level.
Setting example
• IP address
• Subnet mask 255.255.252.128
• Gateway address 13.198.32.1
or
a few times until the target value (e.g.13)
once to move the cursor (_) to the next value.
and
to specify the IP address.
13.198.33.195
3
45
Advertisement
Table of Contents
