Sony UPX-C21 Operating Instructions Manual page 49

7
Press the PRINT button on the station.
The POWER/BUSY lamp on the station blinks in red. The message
"TRANSFER IMAGE..." is displayed on the LCD of the station.
While this messag is displayed, the camera's LCD is turned off, and
when image transfer is finished, the LCD is automatically turned on
again. Be sure not to remove the camera from the station while this
messag is displayed.
After the image data are transferred from the camera to the station, the
POWER/BUSY lamp of the station lights in red, and the message
"PROCESSING IMAGE..." is displayed.
The printing will be completed in about two and a half minutes.
The time required for printing varies depending on the type of paper
used.
When finished printing
Set the POWER switch on the camera to OFF to save battery power.
To print two or more sheets
You can print up to nine sheets of a picture at a time. To print two or more
sheets, set the number of sheets to be printed before pressing the PRINT
button in step 7 above.
MENU
1 2 3,5
1
Press the MENU button on the station.
2
Press the V button so that "PRINT QTY:" appears on the LCD of the
station.
3
Press the b or B button to select the number of sheet to be printed.
4
Press the EXEC button.
The selected number is set, and the set number appears at the left
bottom on the LCD like "Q6."
When you press the PRINT button, printing begins. After printing the set
number of sheet, the setting is returned to 1.
CAMERA
RELERASE
BATTERY
CHARGE B/W COL
BW/
COLOR
SPLIT
1 2 4 8 9 16
EXEC
4
UPX-C21
POWER/BUSY
49