2.Replacement and Adjustment
Paper Feed Sensor (S1)
This procedure is common to the single paper feed unit and the double paper feed unit.
Remove the vertical transfer roller unit
1.
Remove the paper feed sensor (S1) [A] (
2.
Tray Set Switch (SW1)
This procedure is common to the single paper feed unit and the double paper feed unit.
Pull out the paper tray
1.
Remove the rear cover
2.
Pull out the tray set switch (SW1) [A] from the front while releasing the hooks (
3.
Right Door Switch (SW1)
This procedure is common to the single paper feed unit and the double paper feed unit.
Remove the rear cover
1.
26
(Vertical Transfer Roller (Driving
(Paper
Tray).
(Rear
Cover).
(Rear
Cover).
x 2,
x 1,
x 1).
Side)).
x 2,
x 1).