Instructions For Continued Airworthiness; Introduction - Garmin 500W Series Instructions Manual

For continued airworthiness bell 206b
Hide thumbs Also See for 500W Series:
Table of Contents

Advertisement

2. INSTRUCTIONS FOR CONTINUED AIRWORTHINESS

2.1 Introduction

Content, Scope, Purpose and Arrangement:
Applicability:
Definition of Abbreviations:
Precautions:
Units of measurement:
Referenced publications:
Additional Maintenance Data:
Retention:
500W Series
Instructions for Continued Airworthiness Bell 206B
This document identifies the Instructions for
Continued Airworthiness for the modification of the
rotorcraft by installation of a 500W series
GPS/WAAS Nav/Com unit under the Garmin Bell
400W/500W HTAWS STC SR02080SE.
Applies to Bell model 206B rotorcraft altered by
installation of a 500W series GPS/WAAS Nav/Com
unit under the Garmin Bell 400W/500W HTAWS
STC SR02080SE.
See Section 1.5
None
None
Garmin 005-00610-03 Rev. 2 "Equipment List
400W/500W Series Installation Bell 206B STC" or
later FAA Approved Revisions
Garmin 190-01226-01 Rev. 3 "500W Series
Rotorcraft STC Installation Manual" or later FAA
Approved Revisions
Garmin 190-01226-07 Rev. 4 "400W/500W Series
Installation Bell 206B" or later FAA Approved
Revisions
This document, or the information contained within,
will be included in the rotorcraft's permanent
records.
190-01226-03 Rev. 5
Page 5 of 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gps 500wGns 530wGns 530aw

Table of Contents