Aux Commands - Bosch AUTODOME IP starlight 5100i User Manual

72 en | AUX Commands
12

AUX Commands

AUX
1
2
7
8
18
20
50
51
52
53
54
57
60
67
80
88
94
95
96
100
101
149
700
804
1-256
1-256
2020-11 | draft 0.9 |
Function Command
On/Off Auto pan without limits
(Continuous)
On/Off Auto pan between limits
On/Off Run Custom Pre-Position Tour
On/Off Run Pre-Position Tour
On/Off Auto pivot Enable
On/Off Backlight compensation (BLC)
On/Off Playback A, continuous
On/Off Playback A, single
On/Off Playback B, continuous
On/Off Playback B, single
On/Off IR mode
On/Off Night mode IR Filter In/Out
On/Off On-Screen Display (OSD)
On/Off Focus adjust for external IR
Illuminators
On/Off Digital Zoom lock
On/Off Proportional speed
On/- Recalibrate Azimuth Compass
On/Off Azimuth/Elevation Display
On/Off Compass Points Display
On/Off Record Tour A
On/Off Record Tour B
On/Off Turbo mode toggle
On/Off Proportional speed control
adjustment
On/Off Mask Calibration Procedure
Set/- Pre-position Programming
-/Shot Pre-position Recall
Description
AUX on sets IR to Auto.
AUX off sets IR mode off.
Available for AUTODOME IP 5000i IR │
AUTODOME IP starlight 5100i IR only.
AUX on, entered repeatedly, cycles
through increasing speeds Super slow,
Slow, Medium, and Fast.
AUX off decreases speeds through the
same settings.
User Manual
AUTODOME IP starlight 5100i
Bosch Security Systems