Parameter
HIGH-MID
FREQUENCY
HIGH-MID Q 0.5–16
LOW CUT
HIGH CUT
POSITION
Value
20 Hz–10.0
kHz
FLAT, 20
Hz–800 Hz
630 Hz–
12.5 kHz,
FLAT
AMP IN,
AMP OUT
Explanation
Specifies the center of the
frequency range that will be
adjusted by the HIGH-MID
GAIN.
Adjusts the width of the area
affected by the EQ centered
at the HIGH-MID FREQ. Higher
values will narrow the area.
This sets the frequency
at which the low cut filter
begins to take effect. When
"FLAT" is selected, the low cut
filter will have no effect.
This sets the frequency at
which the high cut filter
begins to take effect. When
"FLAT" is selected, the high
cut filter will have no effect.
This lets you place the EQ
before (AMP IN) or after
(AMP OUT) the AMP EQ block.
86