Table of Contents
Advertisement
DELAY Parameters
Parameter
TYPE
DELAY TIME
FEEDBACK
HIGH CUT
EFFECT LEVEL 0–120
DIRECT MIX
MODULATION
RATE
MODULATION
DEPTH
MODULATION
SW
Value
Refer to DELAY Type
1 ms–2000
ms
0–100
630 Hz–
12.5 kHz,
FLAT
0–100
0–100
0–100
OFF, ON
Explanation
Adjusts the delay time.
Adjusts the volume that
is returned to the input. A
higher value will increase the
number of the delay repeats.
This sets the frequency at
which the high cut filter
begins to take effect. When
"FLAT" is selected, the high
cut filter will have no effect.
Adjusts the volume of the
delay sound.
Adjusts the volume of the
direct sound.
Adjusts the modulation rate
of the delay sound.
* Only when TYPE is
MODULATE or SDE-3000.
Adjusts the modulation
depth of the delay sound
* Only when TYPE is
MODULATE or SDE-3000.
Turns the modulation on/off.
* Only when TYPE is SDE-
3000.
81
Hide quick links:
Advertisement
Table of Contents
