Be_Tooldesign - Tool Design - ABB BullsEye Applications Manual

6.1.3 be_tooldesign - Tool design

Usage
The be_tooldesign data type describes the tool dimensions and other related
physical properties.
Components
OrientBody
Data type: bool
If selected, the orientation of the tool will be found by scanning the tool body.
MaxBodyDia
Data type: num
The maximum tool body diameter within the scan range.
Units: mm
xx1400001231
MinBodyDia
Data type: num
The minimum tool body diameter within the scan range. This is typically the diameter
at the "end" of the tool.
Units: mm
xx1400001232
Application manual - BullsEye
3HAC050989-001 Revision: C
© Copyright 2004-2018 ABB. All rights reserved.
6 RAPID reference
6.1.3 be_tooldesign - Tool design
Continues on next page
61