5 User guide
5.3.4 Selecting different BullsEye data
5.3.4 Selecting different BullsEye data
Introduction
Sometimes it is necessary to choose a different data instance. Consider a system
where the BullsEye yoke is mounted upside down.
Illustration: scan device orientations
xx1400001219
The image on the left shows the yoke mounted right side up.The figure on the right
shows the yoke mounted upside down. If the yoke is mounted upside down, we
can not use the default device data, devYokeUp, because its parameters will be
incorrect.
Continues on next page
38
© Copyright 2004-2018 ABB. All rights reserved.
xx1400001220
Application manual - BullsEye
3HAC050989-001 Revision: C