Overview Of This Manual - ABB BullsEye Applications Manual

Overview of this manual

About this manual
This manual explains the basics of when and how to use the option BullsEye®.
Usage
This manual can be used either as a reference to find out if an option is the right
choice for solving a problem, or as a description of how to use an option. Detailed
information regarding syntax for RAPID routines, and similar, is not described here,
but can be found in the respective reference manual.
Who should read this manual?
This manual is intended for:
Prerequisites
Maintenance/repair/installation personnel working with an ABB Robot must:
Reference documents
References
Operating manual - General safety information
Technical reference manual - RAPID Instructions, Functions
and Data types
Technical reference manual - RAPID Overview
Operating manual - IRC5 with FlexPendant
Technical reference manual - System parameters
Operating manual - RobotStudio
Application manual - Production Manager
i
Application manual - BullsEye
3HAC050989-001 Revision: C
• Product overview
• Operation overview
• Requirements overview
• Software set-up
• Software reference, RAPID
• installation personnel
• maintenance personnel
• repair personnel.
• robot programmers
• be trained by ABB and have the required knowledge of mechanical and
electrical installation/repair/maintenance work.
• be familiar with industrial robots and their terminology
• be familiar with the RAPID programming language
• be familiar with system parameters and how to configure them.
This manual contains all safety instructions from the product manuals for the manipulators and the
controllers.
© Copyright 2004-2018 ABB. All rights reserved.
Overview of this manual
Document ID
i
3HAC031045-001
3HAC050917-001
3HAC050947-001
3HAC050941-001
3HAC050948-001
3HAC032104-001
3HAC052855-001
Continues on next page
7