Table of Contents
Advertisement
Chipset Setup,
Continued
ISA VGA Frame Buf. Base Addr
This option automatically sets the base address (or starting point) of the ISA VGA frame buffer according to the size
of the VGA frame buffer.
ISA IRQ 9
At least one IRQ must be free for each PCI Card in the system. If the PCI Card includes a multifunction device, at least
two or more IRQs must be free. This option specifies if IRQ 9 is used on the ISA bus. If it is not used on the ISA bus,
it may be allocated to the PCI bus. The settings are Free or Used.
ISA IRQ 10
At least one IRQ must be free for each PCI Card in the system. If the PCI Card includes a multifunction device, at least
two or more IRQs must be free. This option specifies if IRQ 10 is used on the ISA bus. If it is not used on the ISA bus,
it may be allocated to the PCI bus. The settings are Free or Used.
ISA IRQ 11
At least one IRQ must be free for each PCI Card in the system. If the PCI Card includes a multifunction device, at least
two or more IRQs must be free. This option specifies if IRQ 11 is used on the ISA bus. If it is not used on the ISA bus,
it may be allocated to the PCI bus. The settings are Free or Used.
Chapter 6 WinBIOS Setup
70
Advertisement
Table of Contents
