Changing a Password
Select the Password icon from the Security section of the WinBIOS Setup main menu. Enter the password and press
<Enter>. The screen does not display the characters entered. After the new password is entered, retype the new
password as prompted and press <Enter>.
If the password confirmation is incorrect, an error message appears. If the new password is entered without error, press
<Esc> to return to the WinBIOS Main Menu. The password is stored in CMOS RAM after WinBIOS completes. The
next time the system boots, you are prompted for the password if the password function is present and is enabled.
Remember the Password
Keep a record of the new password when the password is changed. If you forget the password, remove the computer
cover, set switch 1-2 (the DIAG switch) to ON, power on the computer. AMIBIOS will erase the password.
Chapter 6 WinBIOS Setup
80