VTech VSP600 Administrator And Provisioning Manual page 87

Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
VSP600/VSP601 Administrator and Provisioning Manual
provisioning.resync_mode
Sets the mode of the device's provisioning/firmware file check. This
determines which files the device retrieves when the resync process
begins.
config_only,
firmware_only,
config_and_firmware
provisioning.bootup_check_enable
Enables or disables bootup check for configuration and firmware files.
0 (disabled), 1 (enabled)
provisioning.resync_time
Sets the interval (in minutes) between checks for new firmware
and/or configuration file
0–65535
provisioning.remote_check_sync_enable
Enables or disables remotely triggering the device to check for new
firmware and/or configuration files. The file checking is triggered
remotely via a SIP Notify message from the server containing the
check-sync event.
0 (disabled), 1 (enabled)
provisioning.crypto_enable
Enables or disables encryption check for the configuration file(s).
Enable if you have encrypted the configuration file(s) using AES
encryption.
0 (disabled), 1 (enabled)
Default: config_and_firmware
Default: 1
Default: 0 (OFF)
Default: 1
Default: 0
87 Appendix A: Configuration File Settings