Dial Plan - VTech VSP600 Administrator And Provisioning Manual

Dial Plan

The dial plan consists of a series of dialing rules, or strings, that determine whether
what the user has dialed is valid and when the handset should dial the number.
Dialing rules must consist of the elements defined in the table below.
Element Description
x Any dial pad key from 0 to 9, including # and *.
[0-9] Any two numbers separated by a hyphen, where the second number is greater
than the first. All numbers within the range or valid, excluding # and *.
x+ An unlimited series of digits.
, This represents the playing of a secondary dial tone after the user enters
the digit(s) specified or dials an external call prefix before the comma. For
instance, "9,xxxxxxx" means the secondary dial tone is played after the
user dials 9 until any new digit is entered. "9,3xxxxxx" means that only
when the digit 3 is hit would the secondary dial tone stop playing.
PX This represents a pause of a defined time; X is the pause duration in
seconds. For instance, "P3" would represent pause duration of 3 seconds.
When "P" only is used, the pause time is the same as the Inter Digit
Timeout (see SIP Account Management on page 22).
(0:9) This is a substitution rule where the first number is replaced by the second.
For example, "(4:723)xxxx" would replace "46789" with "723-6789". If the
substituted number (the first number) is empty, the second number is
added to the number dialed. For example, in "(:1)xxxxxxxxxx", the digit 1
is appended to any 10-digit number dialed.
|
This separator is used to indicate the start of a new pattern. Can be used to
add multiple dialing rules to one pattern edit box.
A sample dial plan appears below.
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
VSP600/VSP601 Administrator and Provisioning Manual
24 WebUI: System