Installing The Bucket Level Indicator - New Holland 140TL Original Instructions Manual

Installing the bucket level indicator

1. Install the bucket level indicator rod (1) through the
hole in the inner right side bucket plate (2).
2. Install the flat washer (1), and cotter pin (2) onto the
rod end.
3. Slide the indicator bracket (1) over the top end of the
rod (2) and position at the bend (3) in the rod.
4. Make sure that the bucket is resting on the ground,
and is in a level position.
3 - OPERATING INSTRUCTIONS
3-10
1
86060304
2
86060305
3
86060306