HP ProCurve 4000M Installation Manual page 4

NOTE
Preface
The HP DC ProCurve Switches provide DC power versions of the HP
ProCurve 4000M and 8000M Switches for Central Office applications.
• Chapter 1 , "Overview," on page 9 describes the HP DC ProCurve
Switch features and ordering information.
• Chapter 2 , "Installing the Switch in a Seismic Rack," on page 15
describes how to install the HP DC ProCurve Switch in a seismic
rack.
• Chapter 3 , "Connecting the DC Power Supply," on page 21 provides
information for connecting DC power to the HP DC ProCurve Switch
in a Central Office environment.
• Chapter 4 , "Replacing the DC Power Supply," on page 31 provides
information for replacing the HP DC ProCurve Switch DC power
supply.
• Appendix A , "Specifications," on page 35 provides specifications for
the HP DC ProCurve Switch.
• Appendix B , "Regulatory Information," on page 39 provides
regulatory information for the DC power supply.
See the HP ProCurve Switch 4000M and 8000M Installation Guide for
information about switch features and operation, connecting network
devices, connecting to a console, adding and replacing switch modules,
and troubleshooting. See the HP ProCurve Switch Modules Installation
Guide for information about the different switch modules.
This manual is intended for qualified service personnel to use in
installing and servicing the HP DC ProCurve Switch.
4