Table of Contents
Advertisement
Stapling Z-Folded Paper
*c6020
Here is the operation sequence for jogging and stapling Z-folded sheets:
[1]
The lower jogger fence lifts to receive the Z-folded sheets.
[2]
The top fence moves down, to the horizontal position.
[3]
A sheet of paper goes into the stapler tray.
[2]
The positioning roller turns when each sheet is fed to the stapler tray.
[5]
Each sheet is fed down against the lower jogger fence to align the bottom edge.
[6]
After the set number of sheets come in, the jogger top-fence motor switches on and lowers
the top fence against the top of the stack. This aligns the stack for stapling.
[7]
The bottom fence motor lowers the aligned stack to the stapling position.
[8]
The stapler staples the stack.
Stapling
63
Advertisement
Table of Contents
