Electrical Component Description - Ricoh SR4080 Field Service Manual

2. Detailed Descriptions
No.
7 Entrance Rollers
8 Punch Unit
9 Pre-stack Junction Gate
10 Punch Waste Hopper
11 Pre-stack Tray
12 Stack Plate

Electrical Component Description

The following table lists all electrical components and briefly describes their function.
Symbol
Motors
M01 Shift Tray Exit
M02 Shift Tray Lift
M03 Exit Guide
M04 Lower Transport
M05 Shift
M06 Positioning Roller
M07 Stacking Roller Drag
M08 Stacking Roller
M09 Jogger
M10 Stack Feed-Out Belt
M11 Stack Plate - Center
M12 Stapler
M13 Stack Plate – Front
46
Part
Name
Drives the exit roller for the shift tray.
Moves the shift tray up or down.
Opens and closes the upper exit guide.
Drives the lower transport rollers, the positioning roller
and the alignment brush roller
Moves the shift tray from side to side.
Moves the positioning roller into contact with the paper.
Moves the stacking roller in and out.
Rotates the stacking roller.
Moves the jogger fences.
Drives the stack feed-out belt.
Presses down the center of the edge for stapling.
Moves the staple unit from side to side.
Presses down the front corner of the edge for stapling.
No.
19 Lower Transport Rollers
20 Shift Tray
21 Shift Tray Exit Roller
22 Jogger Top Fence
23 Jogger Bottom Fence
Function
Part