Other Functions; Copying Or Exchanging Kits, Pads, Or Layers - Roland OCTAPAD SPD-20 PRO Owner's Manual

Other Functions

Copying or Exchanging Kits, Pads, or
Layers
You can copy or exchange a kit, pad, or layer. The following
explanation uses the example of copying a pad. You can use the same
procedure to execute other operations.
1. Press the [COPY/EXCHANGE] button.
2. Use the [K][J] buttons to select a function.
Function Parameter
From
COPY KIT
To
From
COPY PAD
To
From
EXCHANGE KIT
To
From
EXCHANGE PAD
To
EXCHANGE LAYER Main,Sub
3. Press the [ENTER] button.
U: User
P: Preset
Explanation
Select the copy-source kit.
Select the copy-
destination kit.
Select the copy-source
pad.
Select the copy-
destination pad.
Use FROM and TO to
select the kits that you
want to exchange.
Use FROM and TO to
select the pad that you
want to exchange.
Exchanges the Main and
Sub layers.
Pad number
4. Use the [–][+] buttons to select the copy-source kit
(From).
5 Use the [K] button to move the cursor to "U" or "P, " and then use
the [–][+] buttons to select either U (user) or P (preset).
If you select P (preset), data can be copied from the factory
settings.
5 To select the copy-source pad, press [J] to move the cursor to the
pad number, and then use the [–][+] buttons to select the pad.
You can also select a pad by striking that pad.
5. Press the [ENTER] button.
6. Use the [–][+] buttons to select the copy-
destination kit (To).
To select the copy-destination pad, press [J] to move the cursor
to the pad number, and then use the [–][+] buttons to select the
pad. You can also select a pad by striking that pad.
7. Press the [ENTER] button.
Verify that you have specified the desired copy-source and copy-
destination kit and pads.
8. Press the [ENTER] button once again.
9. Press the [ENTER] button to execute.
If you decide to cancel, press the [EXIT] button.
27