Other Settings (Option) - Roland V-Drums TD-50KV Reference Manual

Hide thumbs

Table Of Contents

Table of Contents

Settings

Making detailed settings for output routing

Here's how to make detailed settings for output routing to the

MASTER OUT jacks, DIRECT OUT jacks, and PHONES jacks.

Reference

For details on the parameters that can be edited, refer to "Data

List" (PDF).

In the SETUP MENU 1 screen (p. 42), press the [F1]

(OUTPUT) button.

Press the PAGE [DOWN] button to access page 3

(OUTPUT ROUTING).

The routing screen appears.

Press a [F1] (ROUTING)–[F3] (ATT) button to select the

item that you want to edit.

Button

Explanation

Specifies how the fader, pad equalizer/compressor,

[F1] (ROUTING) button

and master out output are applied or routed.

Specifies whether the low-frequency region is cut

from the output.

[F2] (LO CUT) button

The frequency setting is the same for each output.

Specifies whether an attenuator is applied to the

output from the DIRECT OUT jacks.

If the ROUTING tab's Master Out setting is "DIRECT, "

[F3] (ATT) button

this also applies to the MASTER OUT jacks.

For more about the Master Out parameter, refer to

"Data List" (PDF).

MEMO

5 To return to the default values, press the [F4] (DEFAULT)

button.

5 The LO CUT and ATT settings do not affect the USB audio

output.

Press the [KIT] button to return to the DRUM KIT screen.

Routing parameter setting examples

Parameter

Explanation

When turned "OFF"

5 The output from the DIRECT OUT jacks is not affected

by the panel faders.

The output from the MASTER OUT jacks is not affected

by the panel faders if the OUTPUT ROUTING Master Out

setting is "DIRECT. "

Fader to Direct

The output of the PHONES jacks is always affected

by the panel faders regardless of the Fader to Direct

setting.

5 Separately from the balance that is adjusted at the PA,

the performer can use the faders at hand to adjust the

balance of the sound that they are monitoring.

When turned "OFF"

5 The output from the DIRECT OUT jacks bypasses the

pad equalizer and pad compressor.

The output from the MASTER OUT jacks bypasses the

PadEq/Comp to

pad equalizer and pad compressor if the OUTPUT

Direct

ROUTING Master Out setting is "DIRECT. "

5 While the equalizer and compressor for each pad are

adjusted at the PA, the performer can perform with

the sound processed by the pad equalizer and pad

compressor of each drum kit.

Parameter

Explanation

When turned "OFF"

5 The pad compressor does not apply to the output from

the PHONES jacks.

PadComp to

5 With settings such as shown in output destination

Phones

setting example 2 (p. 43), you can hear the sound with

full dynamics in your monitor headphones as you

perform, yet use the pad compressor to reduce the

dynamics for the drum monitor and the PA.

With the "DIRECT" setting

5 The master compressor and master EQ effects are not

applied to the output from the MASTER OUT jacks,

allowing you to use the MASTER OUT jacks as DIRECT

OUT jacks (the setting of the [MASTER] knob is applied).

This setting also applies to the output via USB audio to

your computer.

Master Out

5 The PHONES jacks output the sound processed by the

master compressor and master EQ.

5 If you want the output of the MASTER OUT jacks to be

output as direct output, assign the output to MASTER

DIRECT in the PAD OUTPUT screen (DIRECT tab) and the

OTHER OUTPUT screen (DIRECT tab).

Reference

For other settings, refer to "Data List" (PDF).