R/W Heads - Omron V600 Series Operation Manual

R/W Heads

2-1 R/W Heads
2-1-1 Specifications and Outer Dimensions
V600-H07/V600-H11
Item
Operating frequency
Operating temperature
Storage temperature
Operating humidity
Insulation resistance
Dielectric strength
Degree of protection (See note.) Meets or exceeds IEC60529 IP67 and JEM IP67G standards.
Vibration resistance
Shock resistance
Error detection
LED indicators
Cable length
Max. cable length
Weight (approximate)
V600-H07
Power indicator (LED)
Operation indicator (LED)
6
V600-H07
530 kHz
–25°C to 70°C
–40°C to 85°C
35% to 95% RH
50 MΩ min. between cable terminals and case (at 500 VDC)
1,000 VAC 50/60 Hz for 1 minute between cable terminals and case.
10 to 500 Hz, 2.0-mm double amplitude; acceleration: 150 m/s
sweep in each of three axis directions, three sweeps in 11 minutes
2
500 m/s (about 50 G) three times each in X, Y, Z directions, total 18 times
16-bit CRC (Cyclic Redundancy Check) is used in both directions of transmission.
Power supply: green; communications: orange
Standard lengths of 0.5, 2, 5, and 10 m.
30.5 m
1 kg (with 10 m cable)
Note The connectors are not waterproof or oil resistant.
Case material
Fill resin
Cable
Note The connectors are not waterproof or oil resistant.
Model
V600-H11
–10°C to 60°C
–25°C to 75°C
2
(about 15 G); one
50.5 m
650 g (with 10 m cable)
Mounting holes (four, 4.5 dia.)
Bushing Vinyl-insulated
round cord (6 dia)
ABS resin
Epoxy resin
PVC (oil-resistant)
Section 2-1
Connector