Subaru WRX STI S209 Supplement Manual page 25

. Remove any dirt using a neutral
detergent. Do not use hard brushes or
abrasive cleaners. Do not use strong or
harsh chemical cleaners.
. As the CFRP parts may change color if
they are exposed to ultraviolet rays for
extended periods of time, we recommend
that your vehicle be stored in a place
where it will not be exposed to direct
sunlight.
. Do not use wax that contains abra-
sives.
NOTE
Due to the characteristics of the car-
bon roof, white cloudy areas may
occur in spots on the roof, however
these do not affect performance in any
way.
! Precautions when using a high-
pressure washer
Keep a distance of 12 in (30 cm) or more
between the washer nozzle and the
vehicles body.
& Precautions when cleaning
around the rear bumper
cherry red stripe
1) Rear bumper cherry red stripe
! Precautions when using a high-
pressure washer
Keep a distance of 12 in (30 cm) or more
between the washer nozzle and the
stripe.
& Precautions when cleaning
the alloy wheels
The attached alloy wheels have a matte
paint finish, so it is easy to notice if there
is dirt or scratches. Do not polish the alloy
wheels. Doing so could damage them.
CAUTION
. After acid rain falls, it is recom-
mended that the vehicle be
washed before the water on the
paint evaporates.
. Promptly wash off any bird drop-
pings, insects, pollen, tree sap,
or similar substance that ad-
heres to the paint. If it is not
promptly washed off, it may
penetrate the paint.
. Remove any dirt using a neutral
detergent. Do not use hard brushes or
abrasive cleaners. Do not use strong or
harsh chemical cleaners.
. Do not use wax that contains abra-
sives.
! Precautions when using a high-
pressure washer
Keep a good distance of 12 in (30 cm) or
more between the washer nozzle and the
alloy wheels.
21