Download Print this page

Oven Cooking; Control Panel - Amana AGR5725SDS Use And Care Manual

Gas - easy touch control 500
Hide thumbs Also See for AGR5725SDS:

Advertisement

Available languages

Available languages

Oven Cooking

Control Panel

The control panel is designed for ease in programming. The display window on the control shows time of day, timer and oven functions.
Control panel shown includes model specific features. (Styling may vary depending on model.)
A
Broil
Use for broiling and top browning.
B
Bake
Use for baking and roasting.
C
More (▲) or
Enters or changes time, oven
Less (▼)
temperature. Sets HI or LO broil.
D
Timer
Sets Timer.
E
Cook & Hold
Bakes for a preset time, then holds food
warm for 1 hour.
F
Clean
Use to set self-clean cycle.
G
Delay
Programs the oven to start baking at
a later time.
H
Clock
Use to set time-of-day clock.
I
Keep Warm
Use to keep cooked food warm in oven.
J
Cancel
Cancels all operations except Timer
and Clock.
Using the Touchpads
• Press the desired pad.
• Press the ▲ or ▼ to enter time or temperature.
• A beep will sound when any pad is touched.
• A double beep will sound if a programming error occurs.
Note: Four seconds after pressing the ▲ or ▼ pad, the
time or temperature will automatically be entered. If more
than 30 seconds elapse between touching a function pad
and the ▲ or ▼ pad, the function will be canceled and the
display will return to the previous display.
A
B
E
F
C
G
H
I
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To change the clock to
24-hour format:
1. Press and hold the Cancel and Delay
pads for three seconds.
2. Press ▲ or ▼ to select 12 or 24 hour.
3. Set the time of day following the
directions below.
To set the Clock:
1. Press the Clock pad.
• Colon flashes in the display.
2. Press ▲ or ▼ to set the time of day.
• Colon continues flashing.
3. Press the Clock pad again or wait four
seconds. The colon stops flashing.
When electrical power is supplied or after a power interrup-
tion, the last clock time before power was interrupted will
flash.
To recall the time of day when another time function is
showing, press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for Delay Cook, Delay Clean or Cook & Hold.
7
D
J
cont.

Hide quick links:

Advertisement

loading