Alvarion BreezeNET B System Manual page 76

Chapter 4 - Operations
The default is: 1.1.1.4
FTP Gateway IP Address: The FTP Gateway IP Address option enables
defining the FTP default gateway address.
The default is: 0.0.0.0.
FTP User Name: The FTP User Name option enables defining the user name
to be used for accessing the FTP server that is hosting the file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
FTP Password: The FTP Password option enables defining the password to be
used for accessing the FTP server that is hosting the file.
Valid values: A string of up to 18 printable ASCII characters.
The default is: vx
Show FTP Event Log File Upload Parameters: Displays the current values
of the Event Log Upload parameters.
NOTE
There is one set of general FTP parameters (FTP Server IP Address, FTP Gateway IP Address,
FTP Client IP Address, FTP Client IP Mask, FTP User Name and FTP Password). This set (or
relevant parts of the set) serves the SW Download Procedure, the Configuration File
Upload/Download procedure and the Event Log File Upload procedure. Changing any of these
parameters in the menu for either procedure will automatically change its value in the menu for the
other procedures.
4.2.3.12 Feature Upgrade
The Feature Upgrade option enables to enter a license string for upgrading the
unit to support new features and/or options. Upon selecting the Manual Feature
Upgrade option the user will be requested to enter the license string. Each license
string is associated with a unique MAC Address and one feature/option. If the
encrypted MAC Address in the license string does not match the unit's MAC
Address, the string will be rejected. If there is a match, a message notifying of the
new feature/option will be displayed. The unit must be reset for the change to
take effect.
The license string should comprise 32 to 64 hexadecimal digits.
New Feature License files can be uploaded remotely using TFTP (see
58
Appendix
BreezeNET B System Manual
B).