Alvarion BreezeNET B System Manual page 137

The packets with an even number for destination port will get High priority, if
the port number is included is in the specified ranges.
If the administrator selects to prioritize both RTP and RTCP packets, than all
packets whose destination port number is included is in the specified ranges
will get High priority.
The available options are:
RTP & RTCP
RTP Only
The default is RTP & RTCP
Add TCP Port Ranges: This option enables adding TCP port ranges to the list
of priority port numbers. The list can include up to 64 ranges. It is possible to
add discrete port numbers and/or ranges. In ranges, a hyphen is used to
separate between start and end port numbers. A comma should be used to
separate between entries.
For example: 8900,9000-9005,9010,9016-9017.
Delete TCP Port Ranges: This option enables deleting TCP port ranges from
the list of priority port numbers. It is possible to delete discrete port numbers
and/or ranges. In ranges, a hyphen is used to separate between start and end
port numbers. A comma should be used to separate between entries.
For example: 8900,9000-9005,9010,9016-9017.
Delete All TCP Port Ranges: This option enables deleting all TCP port ranges
from the list of priority port numbers.
Show TCP Port Ranges: Select this option to view the current TCP
RTP/RTCP Prioritization option and the list of TCP Port Ranges.
4.2.6.6.3.4 Show Traffic Prioritization
Displays the current values of the Traffic Prioritization parameters, including the
lists of UDP and TCP priority port ranges.
4.2.6.6.4 Show Service Parameters
Displays the current values of the Service Parameters, including the user filtering
parameters and MIR parameters.
Operation and Administration
Menus and Parameters
119