Alvarion BreezeNET B System Manual page 113

The default Network Management IP Address Range is 0.0.0.0 TO 0.0.0.0 (all 10
ranges).
A range can be defined using a string that includes either a start and end
address, in the format "<start address> to <end address>" (example: 192.168.1.1
to 192.168.1.255), or a base address and a mask, in the format "<base address>
mask <mask>" (example: 192.168.1.1 mask 255.255.255.0).
4.2.6.3.6.2 Delete Network Management IP Address Range
The Delete Network Management IP Address Range option enables deleting IP
address range entries from the Network Management IP Address Ranges list.
4.2.6.3.6.3 Delete All Network Management IP Address Ranges
The Delete All Network Management IP Address Ranges option enables deleting
all entries from the Network Management IP Address Ranges list.
4.2.6.3.7 SNMP Traps
The SNMP submenu enables or disables the transmission of SNMP Traps. If this
option is enabled, up to 10 IP addresses of stations to which SNMP traps are sent
can be defined.
4.2.6.3.7.1 Send SNMP Traps
The Send SNMP Traps option enables or disables the sending of SNMP traps.
The default selection is Disable.
4.2.6.3.7.2 SNMP Traps Destination IP Addresses
The SNMP Traps Destination IP Addresses submenu enables defining up to 10 IP
addresses of devices to which the SNMP Traps are to be sent.
The default of all 10 SNMP Traps IP destinations is 0.0.0.0.
4.2.6.3.7.3 SNMP Traps Community
The SNMP Traps Community option enables defining the Community name for
each IP address to which SNMP Trap messages are to be sent.
Valid strings: Up to 8 ASCII characters.
The default for all 10 addresses is "public", which is the default Read community.
4.2.6.3.7.4 Delete One Trap Address
The Delete One Trap Address option enables deleting Trap address entries from
the SNMP Traps Addresses list.
4.2.6.3.7.5 Delete All Trap Addresses
The Delete All Trap Addresses option enables deleting all entries from the SNMP
Traps Addresses list.
Operation and Administration
Menus and Parameters
95