Alvarion BreezeNET B System Manual page 131

4.2.6.6 Service Parameters
The Service Parameters menu enables defining user filtering, MIR parameters and
Traffic Prioritization parameters.
The Service Parameters menu includes the following parameters:
User Filtering Parameters (RB only)
MIR Parameters (RB only)
Traffic Prioritization
4.2.6.6.1 User Filtering Parameters (RB only)
The User Filtering Parameters submenu enables defining the IP addresses of user
devices authorized to access the wireless media for security and/or control
purposes. In addition, it can be used to enable the transmission and reception of
specific protocol frames. These filtering options do not affect management frames
sent to or generated by the unit.
The User Filtering Parameters menu provides the following options:
4.2.6.6.1.1 User Filtering Option
The User Filtering Option disables or enables the User Filtering feature. The
following options are available:
Disable, which means no filtering.
IP Protocol Only, which means only IP Protocol packets pass.
User Defined Addresses Only, which means only IP frames from/to IP
addresses included in the User Filter Addresses list pass.
PPPoE Protocol Only, which means only PPPoE messages pass (Ethernet
type 0x8863 and 0x8864).
The default selection is Disable.
4.2.6.6.1.2 Set/Change Filter IP Address Range
The Set/Change Filter IP Address Ranges option enables defining/updating up to
8 IP address ranges from/to which IP frames are to pass if the User Defined
Addresses Only option is selected in the User Filtering Option parameter.
The default Filter IP Address Range is 0.0.0.0 TO 0.0.0.0 (all 8 ranges).
Operation and Administration
Menus and Parameters
113