Setting The Rear Camera Input; Setting The Navigation Mode; Setting The Navigation Interruption; Setting The Aux Mode - Alpine iXA-W404 Owner's Manual

Setting the Rear Camera Input

With a rear camera connected, rear view video is output to the monitor.
Setting item: Camera IN
Setting contents: OFF / DIRECT / RCA
OFF: The Camera mode is not displayed in the mode
switching screen.
DIRECT: Use when the optional rearview camera
HCE-C107D is connected.
RCA: Use when connecting an optional rearview camera
with RCA output connector.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.

Setting the Navigation Mode

When you connect an optional navigation device, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
OFF: Navigation mode is not displayed. The settings related to
the navigation can not be changed from this unit.
ON: Navigation mode is displayed.

Setting the Navigation Interruption

With an Alpine navigation system connected to the iXA-W404, the
voice guidance of the navigation system will be mixed with the radio or
iPhone/iPod play.
Setting item: NAV. Mix
Setting contents: OFF / ON
OFF: The navigation interruption mode is turned off.
The navigation interruption mode is on.
ON:
See "Adjusting NAV. Mix Level" under "Adjusting the Audio" on
page 13 to set the navigation interruption volume level.
• The volume level for voice prompts during navigation guidance is set
by adjusting the volume while the prompts are announced. When the
announcement finishes, the normal audio volume and the previous
audio screen are restored. The voice prompt volume is always at or
below the current listening volume. If a navigation announcement
cuts in while adjusting the audio level, it always resets to the current
level regardless of the audio level setting.
• This setting is effective when NAV. IN of SYSTEM list screen is ON.

Setting the AUX Mode

Setting item: AUX IN
Setting contents: OFF / ON
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During System setup, although the AUX name can be
changed, it is not displayed on the Audio/Visual source selection
screen.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
Adjusting the AUX name Mode
After setting to ON in "Setting the AUX Mode", this setting can be
carried out.
Setting items: Primary / Secondary*
2
Setting contents: OFF* / AUX*
NAV. / DVD CHG / USB Video*
1
* When a USB-Video box (sold separately) is connected, you can use it
to connect one more External Input device. Setting the Secondary
name can change the source name display of this device.
2
* The setting is only available for Secondary.
3
* The setting is only available for Primary.
• The selected source name is displayed instead of AUX source name.
• Second name can be set only when Primary name is set to USB
Video.
• Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
Adjusting the External Input Audio Level
After setting to ON in "Setting the AUX Mode", this setting can be
carried out.
Setting item: Level
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
Switching the Visual Input Signal System
After setting to ON in "Setting the AUX Mode", this setting can be
carried out.
Setting item: Signal
Setting contents: NTSC / PAL / AUTO
NTSC/PAL: Choose the video input signal type manually.
AUTO: The suitable video input signal type will be
automatically chosen between NTSC and PAL.
• The video input type can be changed.
• When set to AUTO, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
1
3
/ DVD / GAME / TV / EXT.DVD /
3
23
-EN