Table of Contents
Advertisement
• The auxiliary device being connected must have an Interrupt wire
with a negative trigger for this function to operate automatically.
Otherwise, a separate switch needs to be added to switch it manually.
• If Adapter is set in "Setting the BLUETOOTH Connection
(BLUETOOTH IN)" (page 44), the IN Int. Mute setting item is not
displayed.
Setting the Interrupt Icon Display
The unit can display the icon of an external device, such as a telephone,
whenever a phone call comes in to tell you there is a phone call.
Setting item: IN Int. Icon
Setting content: INT / TEL
INT:
The INT icon appears on the display.
TEL: When the external device (telephone) sends the interrupt
signal, the telephone icon appears on the display.
Switching the function of the remote
sensor
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
Setting item: Remote Sensor
Setting contents: Front / Rear
Front:
The remote sensor of this unit is effective.
Rear:
The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective. The remote control operates the
source connected to the AUX OUT terminals.
• The touch panel rear monitor sensor has priority over the remote
control sensor. If the rear monitor (connected to the Alpine rear
monitor output via the Monitor control lead) is touched, the
command is executed regardless of the remote control sensor switch
setting. Note, however, that the remote control sensor that has been
set takes priority if it has been 5 seconds since last touching the
panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to Rear, some onscreen button operations
( [
] Stop, etc.) cannot be performed.
In this case, set the remote control sensor to Front.
Setting the Rear Camera Input
With an optional rear camera connected, rear view video is output to the
monitor. Depending on the connected rear camera, set this item to
"Direct" or "AUX".
Setting item: Camera IN
Setting contents: OFF / Direct / AUX
OFF:
The Camera mode is not displayed in the mode
switching screen.
Direct:
Use when the optional rearview camera such as
HCE-C107D, etc. is connected.
AUX:
Used when connecting to an optional rearview
camera with RCA output connector.
• By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
After setting this item to Direct or AUX, touch the title bar of Camera
IN, the following further setting items can be adjusted.
42
-EN
Setting the Rear Camera Signal Input
The video input signal type can be chosen.
Further Setting item: Camera Signal
Setting contents: NTSC/PAL / Auto
NTSC/PAL: Choose the video input signal type manually.
Auto:
The suitable video input signal type will be
automatically chosen between NTSC and PAL.
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
Rear camera guide line display setting
You can set whether the rear camera guide line is displayed or
not.
Further Setting item: Guide Line
Setting contents: OFF/ON
Adjusting the Rear Camera Guide line
You can adjust the rear camera guide line position.
Further Setting item: Guide Line Adjustment
1
Touch the title bar of Guide Line Adjustment.
The guide line adjustment screen is displayed.
2
Touch the guide pylon you intend to adjust.
3
Touch [ ], [ ], [
] or [
the guide.
After moving the guide, when you touch [
the horizontal row are aligned in a row.
4
After the adjustment is completed, touch [OK].
You can touch [Reset] during adjustment to return to the
default adjustment.
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to ON.
Setting item: Nav. IN
Setting contents: OFF / ON
OFF: Navigation source is not displayed. The settings related
to the navigation can not be changed from this unit.
ON:
Navigation source is displayed.
] to adjust the position of
], the guides in
Hide quick links:
Advertisement
Table of Contents
