Displaying The Title/Text - Alpine CDA-7878 Owner's Manual

Basic Operation
-/J
g DN

Displaying the Title/Text

It is possible to display the CD/Station title if the
title has been previously inputted. For details, see
"Titling Disc/Stations" (page 15). Text information,
such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is
also possible to display the folder name, the file
name, and the ID3 tag, etc. while playing MP3 files.
1
Press the TITLE button.
The mode will change every time the button is
pressed.
About "Title" and "Text"
Title: With this device, it is possible to input the CD/
Station name (refer to page 15). This inputted
name is referred to as a "title."
Text: Text compatible CDs contain text information
such as the disc name and track name. Such
text information is referred to as "text."
Radio mode:
FREQUENCY DISPLAY
CLOCK DISPLAY
TITLE DISPLAY
CD/Changer mode:
ELAPSED TIME DISPLAY
CLOCK DISPLAY
TEXT DISPLAY (DISC NAME)
TEXT DISPLAY (TRACK NAME)
TITLE DISPLAY
14
-EN
BAND/ MODE/
T.S.M. Audio Control
f UP
TITLE
↓
↓
↓
↓
↓
↓
∗1
↓
∗1
↓
MP3 mode:
↓
ELAPSED TIME DISPLAY
↓
CLOCK DISPLAY
↓
FOLDER NAME DISPLAY
↓
FILE NAME DISPLAY
↓
ID3 TAG DISPLAY
↓
FRAME DISPLAY
↓
TITLE DISPLAY
∗1
Displayed during playback of a disc with CD
Text. "NO TEXT" will be displayed when the
CD contains no Text data.
∗2
If an MP3 file contains ID3 tag information, all
the ID3 tag information is displayed (e.g.,
track name, artist name, and album name).
No other information is displayed.
"NO TAG" will be displayed when an MP3 file
contains no ID3 tag information.
∗3
The recording sampling rate and bit rate of
the MP3 file are displayed.
NOTES
• Some characters may not be displayed correctly with
this device, depending on the character type.
• The CD changer must also be CD Text compatible for
the Text information to be displayed.
• When the Scroll Setting (refer to page 10) is set to
"SCROLL MANU", press and hold the TITLE button
for at least 2 seconds to scroll the Text information
only once (TEXT DISPLAY, FOLDER NAME
DISPLAY, FILE NAME DISPLAY or ID3 TAG
DISPLAY mode).
• "No Support" is displayed when the desired text
information cannot be displayed on this unit.
• If the title was not previously input, "------------" is
displayed.
∗2
∗3