Roland Aerophone Pro Owner's Manual page 19

Assigning a continuously-variable controller
For breath (the strength of your breath), bite (the strength at which you bite the reed), thumb lever, and thumb pads, specify the following
parameters.
* Indications of "***" in the table will contain the following names.
Breath_1, Breath_2, Breath_3, Breath_4, Breath_5, Breath_6, Breath_7, Breath_8, BiteDn_1, BiteDn_2, BiteDn_3, BiteDn_4, BiteUp_1, BiteUp_2,
BiteUp_3, BiteUp_4, LeverDn_1, LeverDn_2, LeverUp_1, LeverUp_2, Pad_1, Pad_2, Pad_3, Pad_4
Parameter
Indication
Assign Function *** Func
Input Min Value *** In Min
Input Max Value *** In Max
Output Min Value *** Out Min
Output Max Value *** Out Max
Mode *** Mode
Curve *** Curve
1: Linear 2: Exp L 3: Exp H
Assigning a switch-type controller
For the [S1] / [S2] buttons and the side keys, specify the following parameters.
* Indications of "***" in the table will contain the following names.
S1_1, S1_2, S2_1, S2_2, [X]_1, [X]_2, [C1]_1, [C1]_2, [C2]_1, [C2]_2, [C3]_1, [C3]_2, [C4]_1, [C4]_2, [C5]_1, [C5]_2, [Tc]_1, [Tc]_2, [Ta]_1, [Ta]_2
Parameter
Indication
Assign Function
*** Func
Release Value *** Release Val
Press Value
*** Press Val
Mode *** Mode
Value
& "Aerophone Pro Editor
Parameter Guide" (PDF)
–
0 127
–
0 127
Momentary, Latch
1: Linear 2: Exp L 3: Exp H 4: Log L 5: Log H 6: S-Shape 7: Reverse S
4: Log L 5: Log H 6: S-Shape 7: Reverse S
Value
& "Aerophone Pro Editor
Parameter Guide" (PDF)
–
0 127
Momentary, Latch
Explanation
Specify the function that is assigned to a continuously-operated controller.
Specify the minimum value (Min) and maximum value (Max) in which
controller operations are effective.
& "Function assignment (continuous operation)" (p. 16)
Specify the minimum value (Min) and maximum value (Max) in which the
assigned function operates.
& "Function assignment (continuous operation)" (p. 16)
Specifies the operation mode.
The function operates like a graph (p. 16), according to
Momentary
how you operate the controller.
Each operation switches between Output Min Value and
Output Max Value.
Latch
The switch occurs at the mid-point value between Input Min
Value and Input Max Value.
Specifies the operation curve when the operation mode is MOMENTARY.
& "Function assignment (continuous operation)" (p. 16)
Explanation
Assign the function that is output via MIDI when you operate each
controller.
Specify the value when you take your finger off the button (Release)
and the value when you press the button (Press).
Specifies the operation mode.
The Press Value is applied while the button is pressed,
MOMENTARY and the Release Value is applied while the button is
released.
Each time you press the button, the Press Value and
LATCH
Release Value alternate.
Making Settings in the Menu
19