Download Print this page

Configuration; Wall Mounting; Troubleshooting - ZyXEL Communications PMG1005-T20C Quick Start Manual

Gpon sfu with 1-port gbe lan

Advertisement

Configuration (Optional)
If you want to change the admin
5
password, see traffic statistics,
upload new firmware or reset to
the factory defaults, open a web
browser and go to http://192.168.1.1.
Enter the default User Name
(admin) and Login Password
(1234), and then click Login.
Wall Mounting (Optional)
1. Drill two holes at the distance of
6
54mm apart.
2. Insert screw anchors and screws
(not provided) into the holes.
3. Hang the PMG1005-T20C on the
screws.

Troubleshooting

The PMG1005-T20C doesn't turn on.
- Make sure the power cable is connected, and you've pressed the power button.
- Make sure the power adaptor is connected to an appropriate power source. Make sure the power
source is turned on.
I cannot see or access the Login screen in the Web Configurator.
- Make sure your computer has an IP address in the same subnet as the PMG1005-T20C. If your
PMG1005-T20C is using the default IP address, then your computer should have an IP address from
192.168.1.2 to 192.168.1.254. See your computer help.
- Make sure you are using the correct IP address.
• The default IP address is 192.168.1.1.
• If you changed the IP address and have forgotten it, you have to reset the PMG1005-T20C to its
factory defaults.
- Make sure your Internet browser does not block pop-up windows and has JavaScript enabled.
- Make sure you have entered the User Name and Login Password correctly.
Enter the default User Name (admin) and admin Login Password (1234), and then click Login.
If you changed the default password, please enter the new password. If you cannot remember the new
password, use a pin to push the RESET button for more than 5 seconds to return the device to the
factory defaults, including admin password on the back label.
I cannot access the Internet.
- Check the hardware connections and the LED behavior. If the PON LED is off, restart the
PMG1005-T20C. Check if the fiber cable has come loose or is damaged. Contact the vendor to
replace any damaged cables.
Note: If problems persist, please contact your vendor or customer support.
See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings.
EU Importer: Zyxel Communications A/S | Gladsaxevej 378, 2. th. 2860 Søborg, Denmark | http://www.zyxel.dk
US Importer: Zyxel Communications, Inc | 1130 North Miller Street Anaheim, CA 92806-2001 | http://www.us.zyxel.com
2/2
http://192.168.1.1
User Name :
admin
Password :
Refer to the device label
(default)
PMG1005-T20C
admin
User Name
1234
Password
Login
18.0~22.0
x2
3.5~4.2
Unit: mm
Tapping Screw M4x30 mm
4.5~5.5
18.0~22.0
x2
2.01~2.50
Unit: mm
Copyright © 201 9 Zyxel Communications Corp. All Rights Reserved.
2.8~3.2
54 mm

Advertisement

loading