Table of Contents
Advertisement
PROBLEM
Too much ice forming on back wall
of minibar section (layer of frost
more than 3/8" - 1 cm thick):
Front of cabinet hot to the touch:
IF THE PROBLEMS WITH THE PRODUCT YOU HAVE PURCHASED ARE NOT AMONGST THOSE DESCRIBED
ABOVE AND IF YOU NEED MORE INFORMATION, PLEASE CONTACT THE AUTHORISED AFTER-SALES
SERVICE. YOU WILL FIND THE ADDRESS AND TELEPHONE IN YOUR LOCAL TELEPHONE DIRECTOR
UNDER SMEG.
TO SPEED UP THE SERVICE, PLEASE BE READY TO INFORM OUR CALL SERVICE OPERATORS OF THE
MODEL OF THE PRODUCT YOU HAVE PURCHASED AND THE SERIAL NUMBER MARKED ON THE
NAMEPLATE INSIDE THE BODY OF THE REFRIGERATOR. THANK YOU IN ADVANCE FOR YOUR ASSISTANCE.
16
Instructions for the User
POSSIBLE CAUSE
- cooling
device set too high (meaning
lower
temperature
appliance);
- door opened often or for long
periods.
AFTER-SALES SERVICE – READING THE NAMEPLATE.
temperature
regulator
inside
the
PROBABLE SOLUTION
- turn the regulator to a lower
setting
(1-2)
to
temperature inside the appliance
slightly;
- check
that
the
providing an airtight seal;
- open the door less often and for
shorter times;
- rise in atmospheric temperature
and humidity;
- do not place hot food or drinks
inside the absorption minibar.
- the absorption minibar is operating
normally. Inside the cabinet there
is
a
surface
cooling
designed to restrict the formation
of condensation in the area where
the door gasket closes.
increase
the
gaskets
are
system
Advertisement
Table of Contents
