Transporting The Printer - Epson Stylus Color 660 Manual

c
Caution:

Transporting the Printer

If you need to transport your printer, carefully repack it using the
original box and packing materials as follows:
1. Open the printer cover and make sure that the print head is
in the home (far right) position. If not, turn on the printer and
wait until the print head returns to the home position. Turn
off the printer and then close the printer cover.
c
2. Unplug the power cord from the electrical outlet, then
disconnect the interface cable from the printer.
3. Remove the paper from the sheet feeder and remove the paper
support.
4. Push in the output extension tray, and then raise the output
tray.
-94
Maintenance
Never use alcohols or thinners to clean the printer; these
chemicals can damage the components as well as the case.
Be careful not to get water on the printer mechanism or
electronic components.
Do not use a hard or abrasive brush.
Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the mechanism. Contact your
dealer or a qualified service person if lubrication is needed.
Caution:
Leave the ink cartridges installed when you transport the
printer. Removing the cartridges during transport can
damage the printer.