Answering A Call; Rejecting A Call - Aliph Jawbone User Manual

Using Jawbone
Turning Jawbone Noise Shield Off
While on a call, press and hold the 'NOISE SHIELD
BUTTON' for 3 seconds. The LED status indicator
will blink red and descending tones will be heard in the
earpiece.
Turning Jawbone Noise Shield On
While on a call, press the 'NOISE SHIELD BUTTON'
for 3 seconds. The LED status indicator will blink
white and ascending notes will be heard in the earpiece.
Note: The Noise Shield technology is on by default when-
ever Jawbone is turned on or a call is received or placed.
12
Talk Button
Noise Shield Button

Answering a Call

When there is an incoming call, you will hear the ring
through the earphone. Press the 'TALK BUTTON'
once to accept the call or answer the call using your
mobile phone by following the phone's normal
procedure.
Ending a Call
Press the 'TALK BUTTON'
or end the call using your mobile phone by following the
phone's normal procedure.

Rejecting a Call

If you do not wish to answer an incoming call, press the
'NOISE SHIELD BUTTON'
the call.
Dialing from Your Mobile Phone
Simply make calls on your mobile phone by following
the phone's normal procedure.
Voice Dialing from Jawbone
If your mobile phone is equipped with a standard voice
dialing function, simply press the 'TALK BUTTON'
once when in Standby Mode, and when you hear a
beep say the voice tag. We recommend that you record
the voice tag using Jawbone for maximum effectiveness.
once to end your call,
button once to reject
13