Aliph Jawbone User Manual

Aliph Jawbone User Manual

Aliph jawbone: user guide

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Aliph Jawbone

  • Page 2 • If the headset is not already on, press and hold the ‘Talk Button’ for 3 seconds • You are now ready to use Jawbone Note: The Noise Shield technology is on by default whenever Jawbone is turned on or a call is received or placed. Earbud...
  • Page 3 : Talk everywhere. Jawbone is the world’s first adaptive Bluetooth headset for mobile phones. Its revolutionary Noise Shield technology combines the latest innovations in acoustics, audio processing and product design to produce a quantum leap in headset performance. Not only does the Jawbone technology virtually...
  • Page 4: Getting Started

    Jawbone comes with a built-in rechargeable battery. Please charge the battery fully before first use. Connect Jawbone to the USB cable with the lettering “TOP” facing up. The crescent hole of the connector should be facing down so that it engages...
  • Page 5 1. Insert the USB end into the wall charger. To begin charging, plug the wall charger into a standard 120V wall outlet. 2. You can charge Jawbone directly from your PC or MAC by plugging the USB end into a USB port on your personal computer.
  • Page 6: Talk And Standby Time

    Talk and Standby Time The fully charged battery offers up to 6 hours of talk time and up to 120 hours of standby time. Jawbone automatically enters standby mode at the end of every call.
  • Page 7 Steps for Pairing Jawbone: 1. Place Jawbone where it is no more than one meter away from your mobile phone. 2. Ensure Jawbone is off (the LED status indicator should not be flashing).
  • Page 8 Jawbone’s LED indicator will flash red and beep three times. Jawbone will then turn off automatically. Please repeat steps 2 to 8 above to pair Jawbone and the mobile phone again. Using Jawbone after it is Paired and Connected 1.
  • Page 9: Answering A Call

    3 seconds. The LED status indicator will blink white and ascending notes will be heard in the earpiece. Note: The Noise Shield technology is on by default when- ever Jawbone is turned on or a call is received or placed. Talk Button Answering a Call When there is an incoming call, you will hear the ring through the earphone.
  • Page 10: Adjusting The Volume

    While on a call, press and hold the ‘TALK BUTTON’ for 3 seconds Transferring a Call from Mobile Phone to Jawbone If you have already transferred a call from Jawbone to your mobile phone, you may reverse the process by pressing the ‘TALK BUTTON’ Adjusting the Volume Jawbone will adjust the volume accordingly depending on your noise environment.
  • Page 11: Customize Your Fit

    Resetting You may reset Jawbone to its original settings at anytime. You should not have to repeat the pairing process after resetting Jawbone. Press the reset button by inserting the metal end of the earloop in the reset hole (center hole in the row of five holes located at the back of Jawbone).
  • Page 12 Earloop The standard right-side earloop and earbud are fitted to Jawbone at the factory. If you would like to change the earloop to a different size or use an earloop designed for your left ear, gently pull the standard size earloop out of Jawbone.
  • Page 13 Note: To insert earloops meant for the left ear, you will need to turn the headset over. Earbud Ears vary widely in shapes and sizes, so Jawbone comes with multiple earbuds. If you find that the standard earbud does not fit your ear correctly, choose a different fit by selecting one of the additional earbuds included.
  • Page 14 2) Pull the earbud off Jawbone’s barrel vertically. Attaching the Earbud (see figures below) 1) Hold Jawbone in your hand with the barrel facing you (see figure). 2) With the earbud pointing upwards (see figure), push the earbud onto the barrel. The positioning marks on the earbud and the Jawbone barrel will align.
  • Page 15: Troubleshooting

    Please refer to your mobile phone user guide for specific instructions. • Ensure that Jawbone is within 1 meter of your mobile phone and there are no obstructions, such as walls or other electronic devices.
  • Page 16: Built-In Battery Care

    • To prevent damage to your hearing, DO NOT set the listening volume too high. • Never use Jawbone while taking a bath. • Do not use Jawbone in a sauna or steam room. • Do not keep your Jawbone near a sink or other wet areas.
  • Page 17: Other Notes

    • Do not attempt to force open the built-in battery. • Dispose of the battery according to local regulations. Do not dispose of the battery with household waste. • Disposal of the packaging and Jawbone should be done in accordance with local regulations. Other Notes...

Table of Contents