Aliph Jawbone User Manual page 14

Removing the Earbud
1) Rotate the earbud a quarter turn (90 degrees)
clockwise.
2) Pull the earbud off Jawbone's barrel vertically.
Attaching the Earbud
1) Hold Jawbone in your hand with the barrel facing you
(see figure).
2) With the earbud pointing upwards (see figure), push
the earbud onto the barrel. The positioning marks on
the earbud and the Jawbone barrel will align.
22
(see figures below)
3) Following the arrow marks on Jawbone's barrel,
rotate the earbud counter-clockwise a quarter turn (90
degrees) until it is pointing left.
4) The earbud is now in the correct position.
23