Table of Contents
Advertisement
Display Problems
The display panel is blank when the system is turned on
-
n
n
n
The screen is difficult to read -
n
n
The screen flickers -
n
Make sure the notebook is not in the Standby or
Hibernate suspend modes. The display is turned off to
conserve energy in these modes.
Press Fn+F7 to increase the screen brightness.
Press Fn+F4 to make sure the notebook is not in the
CRT-output only mode.
Press Fn+F7 to increase the screen brightness.
The display resolution should at least be set to
1024x768 for optimal viewing.
1.
Go to [Start > Settings > Control Panel] and
double-click on the Display icon.
2.
Under the Settings page, set screen resolution to
1024x768 and choose at least 256 colors.
It is normal if the display flickers a few times during
shutting down or powering up.
Section 2 TROUBLE SHOOTING
2-7
Advertisement
Table of Contents
