Copying; Copy Mute Events; Copy Song - Alesis X2 Reference Manual

The display will temporarily read "rS" (reset).
Release all three buttons.
4

Copying

Copy Mute Events

The X2 allows you to copy all mute events for a single channel within a Song to any
other channel. This copy function merges copied data with whatever events were
already on the destination channel. To replace a channel's mute events you must
first erase the mute events on that channel before copying (see previous section).
To copy mute events from one channel to another:
1 Press the COPY button.
Its LED will flash.
Select the source channel (the channel whose mute events are to be copied) by
2
pressing its MUTE button. Pressing the same button again de-selects that
channel, so you can select a different source.
The channel's MUTE button LED will flash.
3 Select the destination channel(s) (the channel or channels where the mute events
are to be copied to) by pressing its respective MUTE button.
Selected channels' MUTE LEDs will be flashing half as fast as the source channel.
4 Press UPDATE to execute the copy function.

Copy Song

Copying Songs to other locations in memory makes it possible to make back-ups or
different versions of Song projects. For example, if you just recorded the mute
events into a song, you may want to copy it into a different song location before
adding more mute events to it. Sometimes, instead of trying to delete a series of
unwanted mute events, it is faster and easier to go back to an older version of the
Song that was copied somewhere else in memory.
To copy a Song to another location:
Select a song (00—99) by pressing the DISPLAY button until the SONG LED is
1
lit and using the INC/DEC buttons to change the value in the display.
2 Hold the ALL/ALT button and press the COPY button.
3 Use the INC/DEC buttons to select a Song (00—99) to be the copy destination.
4 Press the UPDATE button to execute the copy.
X2 Reference Manual
Mute Automation
65