Alesis QuadraSynth Plus Reference Manual page 55

QuadraSynth Plus Piano Reference Manual
To audition Programs before overwriting them with STORE
...when editing a Program in Mix Edit Mode:
¿ While in Mix Program Edit mode, press [PROGRAM].
This selects Program Play Mode, retaining your edits to the Program in Mix
Edit.
¡ Press the BANK [ ] button until the word "USER" appears in
the top part of the display, just before the Program name. If a RAM card
is inserted, use the BANK buttons to select a Card Bank.
Use the VALUE [ ] and [ ] buttons to scroll through the
¬
Programs until you find one you wish to overwrite with the new edited
Program. Take note of the number.
Press [MIX].
This recalls the edit buffer in Mix Mode, which contains your edited Program.
ƒ Press [SELECT] twice, until "EDITING: PROGRAM" appears
under the MIX number in the display.
H Press [STORE].
The top line of the display will read "STORE PRG UsrXXX?" where XXX is a
User Program number from 000—127.
Use Quad Knob [2] to select the Program number you noted in
step 3. If necessary, use Quad Knob [1] to select a Card Bank.
Press [STORE] again.
«
The Program is now stored.
At this point your edited Program is stored, however the Mix you were
auditioning before storing the Program still has the old Program number
assigned (if the edited Program was saved to a different Program
number location). Therefore, you need to re-select the new Program
number from within Mix Edit mode.
» Press [MIX], then [SELECT] to access Mix Edit mode.
... Use the MIDI [ ] and [ ] buttons to select the MIDI channel you
want, and use the VALUE [ ] and [ ] buttons or Quad Knob [2] to select
the Program number. If necessary, use Quad Knob [1] to select the Bank.
Overview: Chapter 4
56