Initializing Programs - Alesis QuadraSynth Plus Reference Manual

ƒ

Initializing Programs

If you want to start programming from "scratch", you can easily reset all
parameters to their default settings by re-initializing the software. Make sure
your mod wheel is all the way down before re-initializing, otherwise the "zero"
position of the mod wheel will be incorrect.
To re-initialize the QuadraSynth Plus:
¿
¡
¬
The QuadraSynth Plus will come on showing Program 00, with the EDITED flag
showing in the display. This is the Program Mode edit buffer, set to the default
settings. Re-initializing will also reset all Global parameters to their default
settings, and will initialize all edit buffers so that all Mix and Program
parameters are reset to their default settings. However, none of the Programs or
Mixes are changed when re-initializing the unit. You can proceed to edit, then
[STORE] at any Program location you like.
QuadraSynth Plus Piano Reference Manual
Press [STORE] to copy the sound.
Press [PROGRAM] to enter Program mode.
Turn the unit off.
While holding down both Quad Buttons [1] and [4], turn on the power.
Editing Programs: Chapter 6
126