Warning Stickers And Labels; Personal Protective Equipment (Ppe) - AGFA Anapurna H3200i LED Advanced Operator Manual

2.8 Warning stickers and labels

Warning stickers on the machine and pictographs on packaging (of chemical substances) are used to provide infor-
mation, such as to indicate a hazardous situation. Make sure you know the location of the stickers and their mean-
ing and follow their instructions. They may be of vital importance.
Immediately replace damaged or illegible stickers.

2.9 Personal protective equipment (PPE)

It is not always possible to install sufficient technical safety features. Therefore, before starting work, make sure
you know the safety regulations in force in your company and that you wear the correct personal protective equip-
ment. For work on certain parts of the printer (for example, UV inks and UV LED units) wearing PPE is recom-
mended. Read this manual to find out where PPE is necessary.
:Anapurna H3200i LED Advanced Operator Manual (v1.0)
WARNING
Moving parts can crush and cut.
Keep guards in place. Keep hands clear. Switch Off power before ser-
vicing.
WARNING
UV Light.
Do NOT look directly at the light beam. Wear protective glasses.
Continued exposure may burn skin. Wear protective clothing.
WARNING
Burn hazard. Do Not Touch.
Switch off power and allow to cool before servicing.
WARNING
Hazardous voltage.
Contact may cause electric shock or burn.
Switch Off and Disconnect electric supply before servicing.
WARNING
Avoid injury.
Do Not operate with doors open.
Close all doors before operating the machine.
WARNING
Carefully Read the Operator Manual and Safety instructions
before using the printer.
19