Media/Substrate Flexibility; Compressed Air - AGFA Anapurna H3200i LED Advanced Operator Manual

1.2.8

Media/Substrate flexibility

Specification
Minimum
size
Flexible media
(roll-to-roll, roll-to-sheet and sheet printing).
All printable flexible media, except 'mesh' without liner.
Specification
Media width
Print width
Borderless printing
Media thickness
Maximum roll weight
(including aluminum shaft)
Maximum roll diameter
Core diameter
Shafts
12
Rigid Substrate
Specification
Maximum width
Maximum length
Thickness
Media weight
Multiple board loading possible when using "registration blocks"
1.2.9

Compressed air

Specifications
Pressure compressed air supply
Air quality (category 1, ISO 8573-1)
Air temperature (category 4, ISO 8573-1)
www.agfagraphics.com
printable substrate • Rigid/sheet media (printing single board):
A2 landscape (60 x 42 cm / 1,97 x 1,4 ft)
• Flexible roll media: 60 cm wide (1,97 ft)
Optional dual roll kit available: support for 2 rolls of 152.4 cm (60")
Optional dual roll kit available: support for 2 rolls of 152.4 cm (60")
• Media size: 320 cm (126")
• Printable size: 320 cm (126") / 316 cm (124") with borderless printing
• Supported by 1 rigid roller table: 140 cm (55")
• Supported by 1 rigid roller table + media extension table (default):
320 cm (126")
• Minimum: 1 mm (0,04")
• Maximum: 45 mm (1,77")
• Maximum: 10 kg/m² on printing table
61-320 cm (24"-126")
Up to 320 cm
316 cm (124")
Between 0.3 mm and 45 mm
100 kg (150kg)
based on 320 cm print width or 31,25 kg/m
36 cm (14.17")
3"
Steel shaft at input side
Aluminum shaft at output side
Value
6 Bar
Dry, clean and free from grease
°
+3 C - 50
°
C